General

Card Printing Specifications & Requirements

30 views September 11, 2018 lock-s 0

Design Preparation

We require the finished artwork format.

Unfortunately, we are not designers and can only print what is submitted.

*Please note: average turn around time is between 12-14 days from approval for card printing. Please make allowances for this when organising and submitting your artwork.

 

Options

Printing:

  • Front
  • Back
  • Front & Back

Colour:

  • Black & White
  • Full Colour:

 

Specifications

Card Type: Mifare s50 1k

Card Size: The international card printing standard is 85.5mm x 54mm x 0.76mm

 

Requirements

  • Image of FRONT & Image of Back * If the artwork is the same or single-sided please tell us Supply a complete
  • Format requirement: JPG or PDF format
  • Manuscript size: 86 x 54 (full size: 88 x 56)
  • Font and Line Thickness: Not less than 6pt and not less than 0.1mm thickness
  • Colour tone: 18%~85% is the most ideal range. The clarity may decrease if the brightness is less than 18% and the darkness higher than 80%
  • Borderline: All the words, symbols or logos should be placed 4mm within the borderline
  • Minimum Order Quantity: 200 Printed / 10 Blank

 

 

Submission

Please send your artwork to sales@kas.com.au

Once we receive your artwork, we will send out a ‘placement’ proof for your confirmation before we begin printing.

 

 

 

Whilst every care is taken in the preparation of the final artwork,

it is the customer’s responsibility to ensure that the proof is correct in all areas.

Please be sure to double-check spelling, grammar, layout and design before approving artwork.

KAS is not responsible for any error or omittance not identified by the person providing final authorisation.

 

Was this helpful?